Published by the International Electrotechnical Commission, IEC/EN 61508 governs the development of safety applications based on electrical and electronic systems — Functional safety of electrical/electronic/programmable electronic safety-related systems. It is widely used for critical software in automation, automotive and industrial process control.
Each sector has adapted the generic framework to its own constraints.
| Standard | Sector |
|---|---|
| EN 50716 | Railway |
| EN 60601 | Medical electrical equipment |
| EN 61513 | Nuclear |
| EN 61511 | Industrial processes |
The SIL (Safety Integrity Level) specifies the integrity required of the safety functions allocated to E/E/PE systems — electrical, electronic or programmable electronic.
| Level | Consequences of a failure |
|---|---|
| SIL 4 | Catastrophic impact (highest level) |
| SIL 3 | Impact on the community |
| SIL 2 | Major protection of plant and production, or risk of injury to personnel |
| SIL 1 | Minor protection of plant and production (lowest level) |
At high SIL levels, the standard requires systematic and rigorous development processes. In particular, you have to prove that software has been tested to a certain level, which is what test coverage measurement establishes.
Testwell CTC++ covers all coverage categories, MC/DC included, and is used to obtain certifications such as EN 61508, EN 50716 and DO-178C.
Easy to use, it delivers clear, actionable results. Its low instrumentation overhead makes it usable on embedded software, and it adapts to all targets — even those with little memory. The host-target add-on is supplied with its source code, so it can quickly be adapted to new targets.
For Testwell CTC++ 10.x, we provide a certificate from TÜV SÜD Rail GmbH, covering all SIL and ASIL levels of the standards concerned.
As an alternative — and for DO-178C —, a qualification kit (currently available for versions 9.x and earlier) provides the documentation, test cases and procedures to qualify the coverage analyzer for projects based on DO-178C, EN 50128, IEC 61508, IEC 60880 and ISO 26262.
IEC 61508 requires you to demonstrate the confidence placed in verification tools. The animation shows how the TÜV SÜD certification of Testwell CTC++ and its Safety Package lighten this demonstration.
The 13 Testwell CTC++ animations →IEC 61508-3 highly recommends, at all SIL levels, the use of a coding standard (table B.1), with restrictions: no dynamic objects, limited use of pointers, interrupts and recursion, no unstructured control flow. It also recommends limiting module size and, for verification, static analysis. The sector-specific standards follow the same logic.
TiCS brings together the results of your analyzers — including MISRA C/C++ rules, which cover a large share of these restrictions —, compiler warnings and size and complexity metrics, in a single dashboard, by project and by version.
TiCS is not a code analyzer: it is an orchestrator and aggregator. It drives your tools (MISRA rule checkers, static analyzers, complexity measurement, compilers), consolidates their results and gives a high-level view of them, tracked over time. Detecting deviations from the coding standard remains the job of these analyzers. In the sense of IEC 61508-3 (7.4.4), they are therefore the first tools to justify as off-line support tools: check whether each tool in your configuration is certified for IEC 61508 and for the target SIL.
IEC 61508 requires you to justify the confidence placed in each tool. TiCS orchestrates the analyzers in your configuration, and it is for them that certification is checked. The animation shows how TiCS brings them together, deploys them and keeps them up to date.
The 14 TiCS animations →
Industrial automation, energy, railway, healthcare: find references and testimonials by sector.
DO-178C, EN 50716, IEC 60880, ISO 26262, IEC 62304, ISO 25119: each standard sets its own coverage requirements.